Protein Electrophoresis and Western Blotting Education Center
With a variety of detection techniques for western blotting-chemiluminescence, fluorescence, or colorimetric, to choose from, you can select a technology to match your experimental requirements.
Chemiluminescent detection | Fluorescent detection | Chromogenic detection | |
Major advantage | Highest sensitivity | Detect multiple targets at once | Easily visualize blots without equipment |
---|---|---|---|
Technology overview | Enhanced chemiluminescent (ECL) HRP and AP substrates providing pictogram to femtogram level detection | Simultaneous detection of multiple proteins on the same blot using a variety of available fluorescent dyes and conjugated 2° antibodies | Direct visualization of your target protein using color detection reagents |
Signal Source | Indirect signal from enzymatic reaction | Direct signal from fluorophore | Indirect signal from enzymatic reaction |
Signal Duration | Limited (hours) | Extended (weeks to months) | Extended (weeks to months) |
Sensitivity | Excellent, with a wide variety of substrates available | Good, may require higher concentration of secondary antibody | Limited, best for high abundant proteins |
Consistency | Possible variation between blots, can be mitigated by using high duration substrates | High reproducibility between blots | Possible variation between blots |
Detection | X-ray film and imaging instruments | Imaging instruments with appropriate filters or lasers | Visual, no instrumentation required |
Quantitation | Single-channel detection makes normalization challenging | Multiplexing with an internal control makes normalization simpler | Single-channel detection makes normalization challenging |
Other considerations |
|
|
|
HRP substrates
AP substrates
Fluorescent secondary antibodies
Overview of western blot detection techniques
Chemiluminescent western blot detection
Chemiluminescent substrates are popular because they offer several advantages over other detection methods. These advantages have allowed chemiluminescence to become the detection method of choice in most protein laboratories. Using chemiluminescence allows multiple exposures to be made in order to obtain the best image. The detection reagents can be removed and the entire blot reprobed to visualize another protein or to optimize detection of the first protein. A large linear response range allows detection and quantitation for a large range of protein concentrations. Most importantly, chemiluminescence yields the greatest sensitivity of any available detection method.
Key Highlights
- Greatest sensitivity
- Detection and quantitation for a large range of protein concentrations
Chemiluminescent substrates for horseradish peroxidase (HRP) are majority two-component systems consisting of a stable peroxide solution and an enhanced luminol solution. To make a working solution, the two components are mixed together. When incubated with a blot on which HRP-conjugated antibodies (or other probes) are bound, a chemical reaction emits light at 425 nm which can be captured with x-ray film, CCD camera imaging devices and phosphorimagers that detect chemiluminescence. Chemiluminescent substrates for alkaline phosphatase are also readily available. Click here for information on chemiluminescent western blot detection can be found here.
Fluorescent western blot detection
Fluorescent reagents are growing in popularity for western blotting because they offer increased time savings over chemiluminescent detection and reduced chemical waste compared to both chemiluminescent or chromogenic detection systems. While the detection limits are still not as low as chemiluminescent detection, fluorescent detection has the unique advantage of allowing multiple targets to be assayed for on the same blot at the same time without the need to strip and reprobe.
Key Highlights
- Multiplexing capability
- Direct signal
The growing demand for multiplex western blotting has driven the development of many new fluorescent dyes (such as Alexa Fluor Plus conjugates). These new fluorophores are brighter and more photo stable than the traditional fluorescein and rhodamine molecules traditionally used and comprise a broader range of non-overlapping spectra. Together with the advances in the digital imaging equipment these new fluorophores enable extremely powerful analyses in western blotting. Click here for information on fluorescent western blot detection can be found here.
Chromogenic western blot detection
Chromogenic or precipitating substrates have been used widely for many years and offer the simplest and most cost-effective method of western blot detection. When these substrates come in contact with the appropriate enzyme (e.g. Alkaline phosphatase- AP or horseradish peroxidase-HRP), they are converted to insoluble, colored products that precipitate onto the membrane. The resulting colored band or spot requires no special equipment for processing or visualizing. Chromogenic blotting substrates are available in a variety of specifications and formats, producing a range of colored precipitates. The appropriate substrate choice depends on the enzyme label and desired sensitivity. Similar to developing film, the blot is incubated in substrate until the desired amount of development is achieved. In contrast to chemiluminescent western blotting, the colored precipitate formed by chromogenic substrates cannot be easily stripped off to facilitate re-probing procedures. Therefore, it is important to allow the reaction to proceed until color development is satisfactory and then stop the reaction.
Key Highlights
- No special instrumentation required
- Most cost-effective technique for high abundant targets
The low sensitivity of chromogenic substrates makes it difficult to optimize for detecting proteins of low abundance. Although the reaction can be allowed to develop for several hours or even overnight, this also allows background signal to continue to develop. Where chromogenic substrates fail in terms of sensitivity, they are ideal for applications where protein abundance is high. Click here for information on chromogenic western blot detection can be found here.
Chemiluminescent detection | Fluorescent detection | Chromogenic detection | |
Major advantage | Highest sensitivity | Detect multiple targets at once | Easily visualize blots without equipment |
---|---|---|---|
Technology overview | Enhanced chemiluminescent (ECL) HRP and AP substrates providing pictogram to femtogram level detection | Simultaneous detection of multiple proteins on the same blot using a variety of available fluorescent dyes and conjugated 2° antibodies | Direct visualization of your target protein using color detection reagents |
Signal Source | Indirect signal from enzymatic reaction | Direct signal from fluorophore | Indirect signal from enzymatic reaction |
Signal Duration | Limited (hours) | Extended (weeks to months) | Extended (weeks to months) |
Sensitivity | Excellent, with a wide variety of substrates available | Good, may require higher concentration of secondary antibody | Limited, best for high abundant proteins |
Consistency | Possible variation between blots, can be mitigated by using high duration substrates | High reproducibility between blots | Possible variation between blots |
Detection | X-ray film and imaging instruments | Imaging instruments with appropriate filters or lasers | Visual, no instrumentation required |
Quantitation | Single-channel detection makes normalization challenging | Multiplexing with an internal control makes normalization simpler | Single-channel detection makes normalization challenging |
Other considerations |
|
|
|
HRP substrates
AP substrates
Fluorescent secondary antibodies
Overview of western blot detection techniques
Chemiluminescent western blot detection
Chemiluminescent substrates are popular because they offer several advantages over other detection methods. These advantages have allowed chemiluminescence to become the detection method of choice in most protein laboratories. Using chemiluminescence allows multiple exposures to be made in order to obtain the best image. The detection reagents can be removed and the entire blot reprobed to visualize another protein or to optimize detection of the first protein. A large linear response range allows detection and quantitation for a large range of protein concentrations. Most importantly, chemiluminescence yields the greatest sensitivity of any available detection method.
Key Highlights
- Greatest sensitivity
- Detection and quantitation for a large range of protein concentrations
Chemiluminescent substrates for horseradish peroxidase (HRP) are majority two-component systems consisting of a stable peroxide solution and an enhanced luminol solution. To make a working solution, the two components are mixed together. When incubated with a blot on which HRP-conjugated antibodies (or other probes) are bound, a chemical reaction emits light at 425 nm which can be captured with x-ray film, CCD camera imaging devices and phosphorimagers that detect chemiluminescence. Chemiluminescent substrates for alkaline phosphatase are also readily available. Click here for information on chemiluminescent western blot detection can be found here.
Fluorescent western blot detection
Fluorescent reagents are growing in popularity for western blotting because they offer increased time savings over chemiluminescent detection and reduced chemical waste compared to both chemiluminescent or chromogenic detection systems. While the detection limits are still not as low as chemiluminescent detection, fluorescent detection has the unique advantage of allowing multiple targets to be assayed for on the same blot at the same time without the need to strip and reprobe.
Key Highlights
- Multiplexing capability
- Direct signal
The growing demand for multiplex western blotting has driven the development of many new fluorescent dyes (such as Alexa Fluor Plus conjugates). These new fluorophores are brighter and more photo stable than the traditional fluorescein and rhodamine molecules traditionally used and comprise a broader range of non-overlapping spectra. Together with the advances in the digital imaging equipment these new fluorophores enable extremely powerful analyses in western blotting. Click here for information on fluorescent western blot detection can be found here.
Chromogenic western blot detection
Chromogenic or precipitating substrates have been used widely for many years and offer the simplest and most cost-effective method of western blot detection. When these substrates come in contact with the appropriate enzyme (e.g. Alkaline phosphatase- AP or horseradish peroxidase-HRP), they are converted to insoluble, colored products that precipitate onto the membrane. The resulting colored band or spot requires no special equipment for processing or visualizing. Chromogenic blotting substrates are available in a variety of specifications and formats, producing a range of colored precipitates. The appropriate substrate choice depends on the enzyme label and desired sensitivity. Similar to developing film, the blot is incubated in substrate until the desired amount of development is achieved. In contrast to chemiluminescent western blotting, the colored precipitate formed by chromogenic substrates cannot be easily stripped off to facilitate re-probing procedures. Therefore, it is important to allow the reaction to proceed until color development is satisfactory and then stop the reaction.
Key Highlights
- No special instrumentation required
- Most cost-effective technique for high abundant targets
The low sensitivity of chromogenic substrates makes it difficult to optimize for detecting proteins of low abundance. Although the reaction can be allowed to develop for several hours or even overnight, this also allows background signal to continue to develop. Where chromogenic substrates fail in terms of sensitivity, they are ideal for applications where protein abundance is high. Click here for information on chromogenic western blot detection can be found here.
Download brochure: Western Detection Workflow
Explore: Western Blot Transfer Systems
Explore: Western Blot Validated Antibodies
For Research Use Only. Not for use in diagnostic procedures.