Dionex ICS-6000 HPIC System: Run different methods simultaneously
The modular Thermo Scientific Dionex ICS-6000 HPIC system is a highly configurable ion chromatography (IC) system with high pressure capabilities. It enables you to develop and run different methods for a single sample or for different samples simultaneously. The robust design of this system enables operation at up to 5000 psi and produces consistent, reliable results. As a top-of-the-line ion chromatography system, the Dionex ICS-6000 HPIC system is designed to adapt to the needs of users and push the boundaries of what is possible in ion analysis.
Highlights
Flexible configurations
Dionex ICS-6000 HPIC systems come in a variety of configurations, with the ability operate as a single- or dual-channel system to run samples concurrently. This high-pressure IC system can address a full range of IC applications, from 2-D IC for trace-level analysis to high-performance anion-exchange chromatography with pulsed amperometric detection (HPAE-PAD) for complex carbohydrate analysis.
Versatile detection capabilities
The system is compatible with a wide variety of detectors, including suppressed conductivity, electrochemical, UV-Vis absorbance, inductively coupled plasma mass spectrometry (ICP-MS), and mass spectrometry (MS).
Wide range of IC columns
The Dionex ICS-6000 HPIC system is compatible with 4 μm-particle-size IC columns, which are available in 150 or 250 mm lengths. The 150 mm-length columns decrease run times while maintaining chromatographic resolution. The 250 mm-length columns offer improved peak resolution.
Mass spectrometry compatible
The Dionex ICS-6000 HPIC system is the ideal IC system to work in tandem with mass spectrometry, as it can used for a wide variety of sample analyses. From single quadrupole to high resolution accurate mass (HRAM) Thermo Scientific Orbitrap mass spectrometers, IC-MS analysis provides improved selectivity and higher sensitivity.
Automated Eluent Generation (EG)
For unmatched method reproducibility and accuracy, the system can electrolytically generate high-purity hydroxide, carbonate, bicarbonate, or methanesulfonic acid (MSA) eluents when provided with a source of high-purity deionized water. Using the Dual EGC mode, the Dionex ICS-6000 HPIC system can also generate potassium hydroxide/potassium methanesulfonate (KOH/KMSA) eluents for complex carbohydrate analysis.
CDS Software
The Dionex ICS-6000 HPIC system comes with the easy-to-use Thermo Scientific Chromeleon Chromatography Data System (CDS). This software provides powerful control and data processing for IC and offers eWorkflows that make all our essential applications easily accessible. Additionally, the Chromeleon CDS can control mass spectrometry systems, enabling seamless IC-MS analyses.
Videos
System specifications
The table below provides a brief overview of the Dionex ICS-6000 HPIC system specifications. Not all specifications are listed. For a full list of the specifications, download the Dionex ICS-6000 HPIC system specifications sheet.
Specification |
Dionex ICS-6000 HPIC System |
|---|---|
Pump |
|
Type |
Dual-piston (in series), microprocessor controlled, constant 10 mm primary stroke length, variable speed Isokinetic Eluent Precompression |
Construction |
Chemically inert, metal-free PEEK pump heads and flow path; compatible with aqueous eluents of pH 0–14 and reversed-phase solvents |
Pressure range |
Analytical: 0–35 MPa (0–5000 psi) |
Flow rate range |
Analytical: 0.000–10.000 mL/min with settable flow increments at 0.001 mL/min, without changing pump heads. Optional heads allow flow up to 22.4 mL/min. |
Flow rate precision |
< 0.1% |
Flow accuracy |
< 0.1% |
Pressure ripple |
< 1% at 1.0 mL/min/typical, < 0.2% (with damper) at 10 µL/min, < 1.0% (without damper) typical |
Pressure |
None required |
Piston seal wash |
Standard, automatic operation |
Vacuum degasser |
Integrated, optional 1 channel for isocratic pump or 4 channels for quaternary pump |
Gradient formation |
Quaternary low pressure (analytical only) or electrolytic eluent generation at high pressure |
RFIC-EG gradients |
Analytical: 0.1–100 mM |
Gradient profiles |
Any combination of an unlimited number of linear, convex, and concave positive and negative gradient profiles |
Gradient proportioning accuracy and precision |
±0.5 at 2 mL/min |
Gradient mixing |
Passive mixers for 2 mm and 4 mm i.d. columns, optional |
Eluent generation |
Optional eluent generation (RFIC-EG) |
Eluent on/off valve |
Electrically actuated, standard |
Leak sensor |
Optical, standard |
System software |
|
Software |
Chromeleon 7.2 CDS software, supports Microsoft® Windows® 7, operating systems |
Automated procedure wizards |
Standard feature |
System smart startup and shutdown |
Standard feature |
Application templates |
Standard feature |
Automation support of 3rd party instruments |
Fully controls over 300 different instruments from more than 30 manufacturers, including GC, HPLC, and MS |
Customizable system control panels |
Standard feature |
Signal channels |
Pump pressure |
Data trending plots |
All numerical device parameters |
System status virtual channels |
Standard feature |
Power failure protection |
Standard feature |
System trigger commands and conditionals |
Standard feature |
Daily audit trail |
Standard feature |
Sample audit trail |
Standard feature |
System calibration storage |
Factory, present and previous. Completely user selectable |
Customized reporting |
Standard feature with unlimited report sheets |
GLP compliance |
Optional |
Physical specifications |
|
Dimensions (h × w × d) |
41 × 23 × 56 cm (16 × 8.75 × 21.5 in.) |
Weight |
SP: 20.4 kg (45 lb) — DP: 24.1 (55 lb) |
Power requirements |
90–265 V ac, 47–63 Hz |
Flow path |
All polymeric (PEEK), anion or cation configuration |
For Research Use Only. Not for use in diagnostic procedures.